Safety Precautions for Using Your Saturday Neon LED Sign

At Saturday Neon, your safety is our top priority. Our LED neon signs are designed with high-quality materials and adhere to strict safety standards. To ensure a safe and enjoyable experience, please review the following safety precautions when installing, operating, and maintaining your LED neon sign.

General Safety Guidelines

• Read Instructions Carefully: Before installation or use, read all provided instructions and manuals thoroughly.
• Adult Supervision: Installation should be performed by adults or under adult supervision, especially when tools or electrical components are involved.
• Indoor Use Only (Unless Specified): Unless explicitly labeled for outdoor use, our signs are intended for indoor environments.

Installation Safety

• Choose a Safe Location:
  • Avoid Moisture: Do not install the sign in areas exposed to water, rain, or excessive humidity.
  • Stable Surface: Ensure the mounting surface is flat, stable, and capable of supporting the sign's weight.
• Proper Mounting Hardware:
  • Use Included Hardware: Utilize the flush mount screw kit provided with your sign for secure installation.
  • Weight Limits: If using alternative mounting methods like 3M Command Strips, verify that they can support the sign's weight (not suitable for signs over 16 lbs).
• Tool Safety:
  • Use Correct Tools: Employ appropriate tools such as screwdrivers or drills safely and as instructed.
  • Wear Protective Gear: Consider wearing safety glasses and gloves during installation to prevent injuries.

Electrical Safety

• Inspect Cords and Plugs:
  • Check for Damage: Before plugging in, examine cords and plugs for any signs of wear or damage.
  • Do Not Use Damaged Components: If any part is damaged, do not use the sign until it has been repaired or replaced.
• Power Source:
  • Use Proper Voltage: Connect the sign to a power outlet that matches the voltage requirements specified in the manual.
  • Avoid Overloading Outlets: Do not plug the sign into an overloaded power strip or extension cord.
• Avoid Moisture Contact:
  • Keep Electrical Components Dry: Ensure that plugs, cords, and the sign itself do not come into contact with liquids.

Operation Safety

• Supervised Use:
  • Keep Away from Children: The sign is not a toy. Keep it out of reach of young children to prevent accidental damage or injury.
• Temperature Awareness:
  • Allow for Ventilation: While LED signs produce minimal heat, ensure there is adequate airflow around the sign.
  • Avoid Heat Sources: Do not place the sign near flammable materials or heat-emitting appliances.
• Secure Cables:
  • Prevent Tripping Hazards: Arrange power cords to avoid tripping or accidental unplugging.
  • Use Cable Management: Utilize cable clips or channels to keep cords tidy and secure.

Maintenance and Care

• Regular Inspection:
  • Check Mounts and Hardware: Periodically inspect the mounting hardware to ensure the sign remains securely attached.
  • Assess Electrical Components: Look for signs of wear on cords and plugs.
• Cleaning the Sign:
  • Unplug Before Cleaning: Always disconnect the sign from the power source before cleaning.
  • Use Gentle Methods: Clean with a soft, dry cloth. Avoid using liquids or abrasive materials.
• Avoid Modifications:
  • Do Not Alter the Sign: Modifying the sign or its components can compromise safety and void the warranty.
  • Use Authorized Parts Only: Replace any damaged parts with official Saturday Neon components.

Disposal and Recycling

• Environmentally Responsible:
  • Do Not Incinerate: Do not burn the sign or its components.
  • Follow Local Regulations: Dispose of electronic components according to local e-waste recycling guidelines.

Compliance and Certifications

• Safety Standards:
  • Certified Components: Our signs use components that comply with relevant safety standards and certifications.
  • Quality Assurance: Each sign undergoes rigorous testing to ensure it meets our safety and quality criteria.

In Case of Emergency

• Unplug Immediately:
  • If Malfunction Occurs: Should the sign smoke, spark, or behave unexpectedly, unplug it immediately.
• Do Not Attempt Repairs:
  • Seek Professional Assistance: Contact Saturday Neon customer support or a qualified electrician for help.

Contact Us for Support

If you have any questions or concerns about the safety or operation of your LED neon sign, please reach out to our customer support team. We're here to help ensure you have a safe and enjoyable experience with your Saturday Neon product.

• Email: support @ saturdayneon . com
• Hours: Monday – Friday, 9 AM – 5 PM MST