How to Install Your Saturday Neon LED Sign Using 3M Command Strips

Looking for a damage-free way to hang your Saturday Neon LED sign? 3M Command Strips offer a convenient solution for mounting lighter signs without drilling holes. Follow this guide to safely install your sign using these adhesive strips.

What You’ll Need:

• Your Saturday Neon LED sign (weighing 16 lbs or less)
• 3M Command Strips (Heavy-Duty recommended)
• Rubbing alcohol or a clean cloth

Step 1: Prepare the Wall and Sign

1. Clean the Wall Surface
   • Use rubbing alcohol or a damp cloth to clean the area where you'll mount the sign.

   • Ensure the surface is dry and free of dust or grease for optimal adhesion.

     Clean the Back of the Sign

   • Wipe down the mounting areas on the back of your sign to remove any dust.

Step 2: Plan the Layout

1. Choose the Location
   • Select a flat, smooth surface for best results.
   • Avoid overly textured walls or surfaces with wallpaper.
   • Ensure proximity to an outlet or power source

Step 3: Attach Command Strips to the Sign

1. Prepare the Strips
   • Separate the Command Strips according to the package instructions.

   • For heavier signs (up to 16 lbs), use multiple strips to distribute the weight.

     Stick Strips to the Sign

   • Press one side of each strip firmly onto the designated mounting spots on the back of the sign.
   • Ensure each strip is securely attached.

Step 4: Mount the Sign on the Wall

1. Position the Sign

   • Align the sign with your pencil marks on the wall.

     Attach to the Wall

   • Press the sign firmly against the wall where the Command Strips will adhere.

   • Hold for 30 seconds to ensure a strong bond.

     Secure the Adhesion

   • Gently pull the sign from the bottom to separate the strips, leaving half on the wall.
   • Press firmly on the strips left on the wall for another 30 seconds.
   • Reattach the sign by aligning the strips and pressing firmly until they click.

Step 5: Final Checks

1. Test the Stability

   • Gently press on different areas of the sign to ensure it's securely mounted.

     
     

Additional Tips

• Temperature Considerations:

  • Apply the Command Strips in temperatures above 50°F (10°C) for best results.

    Removing the Sign:

  • To avoid damaging your wall, follow the Command Strips removal instructions when taking down your sign.

    Not Suitable for All Surfaces:

  • Avoid using on rough or porous surfaces like brick or unfinished wood.